mode
mscan_sample_size
ikms
All
This parameter was part of the unused "ink key" feature. It has been removed in
nvs module version 0.06 and higher.
On nvs module versions lower than 0.06, the parameter can be ignored.
real
0
0.0 to 32.0 [inches]
The ink key feature has been somewhat tested, debugged and abandoned. Size of
the ink key sample sent to the workstation in the mainscan direction. If set to
zero, the sample size in the mainscan direction is the same as the mainscan
image size. This sample is calculated by adjusting the DPE samples for
orthogonality and size. Note that as the sample size is made smaller, the
workstation to recorder baud rate must be increased to handle the increased
number of samples. When last tested, it was not possible to send ink key
samples smaller than 0.4" by 0.2" (mscan by sscan).
cal